Crystal Wrap Cuff Bracelet Tutorial

_DSC5932_2crystalwrappedbracelet-kit_DSC5933-2crystalwrapbracelet-kit

Experience the fun of making something that you get to wear that same afternoon. This Crystal Wrap Cuff Bracelet tutorial is a great project for learning the very basics of wire wrapping. Once you have the experience of ease, I am confident that you will be well on your way to making more fun projects!


Learn How!

Supplies:
1 Hammered Cuff Bracelet
2’ of 24-gauge gold wire
4.5” of Rhinestone Chain 14pp

Tools Needed:
1 pair Shear Flush Cutters
1 pair Needle Nose Pliers


Step 1:
Use needle nose pliers to create a 90-degree bend on the end of a piece of 24 gauge gold wire. Place the wire down onto the backside of the Hammered Cuff Bracelet ¾” from the end of the cuff. Wrap the wire around the cuff 3 times, wrapping over the starting point to secure the wire to the cuff. Use a pair of needle nose pliers to tug firmly on the wire making the starting point very tight and secure. Trim away the excess wire of your starting point using a pair of flush cutters. Continue to wrap the wire around the cuff another time.

DSC_0894-1000x1000


Step 2:
Lay the strand of rhinestone chain onto the cuff bracelet with one end right next to your starting point. Keeping the chain in position while you wire wrap two times within the first gap of the rhinestone chain. This part can be a wee bit tricky, so be patient if it feels awkward to get started.

DSC_0899-1000x1000


Step 3:
Continue onto the next gap in the rhinestone chain and wire wrap 2 times again. Continue on until you are ¾” from the other end of the cuff bracelet.

DSC_0905-1000x1000 DSC_0119-1000x1000


Step 4:
Once you have arrived ¾” from the end, wire wrap two times in between the gap of the rhinestone chain. Use your flush cutters to remove any excess rhinestone chain.

DSC_0121-1000x1000 DSC_0128-1000x1000


Step 5:
Wrap your wire around the last link of the rhinestone chain another two times. Turn your cuff bracelet over and tuck your wire on the backside underneath your final wrapped area. Using needle nose pliers, pull firmly on the wire that is tucked under the wrapped area making it tight and secure. Trim the excess wire with flush cutters.

DSC_0134-1000x1000


Step 6:
Repeat the steps to make the other 2 cuff bracelets.

_DSC5933-2crystalwrapbracelet-kit


Shop Supplies Wholesale:

Shop WHOLESALE:


Shop Nunn Design Wholesale

Nunn Design has been supplying jewelry artists with findings for over 20 years. Shop wholesale jewelry findings for creative jewelry makers.

Shop Nunn Design!

How to Purchase Wholesale?

If you are interested in becoming one of the many designers who trust their jewelry to Nunn Design Findings, please join us by registering to become one of our wholesale customers!

Please visit our Where to Buy Page for a listing of online stores that sell Nunn Design Findings retail.


If you enjoyed reading this post, please subscribe to our blog. Here are 10 Reasons Why to Subscribe and a place to do so!

Leave a Reply

Your email address will not be published. Required fields are marked *

Previous Next
Close
Test Caption
Test Description goes like this