Marla’s Table – Bead Embroidering Around Cabochons

Workbench_Salezze_9

Innovation Team Member, Marla Salezze is crazy about beading.  Take a look into her studio to see the latest project on her table. – Becky


Marla Says:

I love to bead embroider around cabochons. A lot of cabochons I bead with are purchased pre-made using a variety of materials including resin, polymer clay, crystal and wood. So when I found these large, blank wood beads at a bead show a few weeks ago, I knew I wanted to create my own handmade cabochons to bead with.

Workbench_Salezze_1

These beads provide the perfect blank canvas to be embellished with Nunn Design transfer sheets, brass adornments and resin.

Workbench_Salezze_2

First, I traced the large beads onto the Nunn Design transfer sheets and cut out my shape to cover the entire surface of the blank bead.

Workbench_Salezze_3

Following the Nunn Design transfer sheet’s usage instructions, I soaked the transfer sheets in room temperature water for about a minute until the transfer image began separating from the white backing.

Workbench_Salezze_4

I gently placed the transfer image on a paper towel and blotted any excess water.

A step I wish I had done in retrospect was to paint a thin coat of Nunn Design sealant on the surface of the blank bead prior to transferring the image. This step ensures the transfer sheet is bonded to the blank wood surface and prevents the resin from seeping into the transfer sheet image.

I then transferred the image to the blank bead and gently using my fingertips, spread out any air bubbles.

Workbench_Salezze_5

Once the transfer image is set, paint a thin coat of Nunn Design sealant over the transfer sheet to seal it. Make sure you glue around the corners to protect the transfer sheet and prevent the resin from seeping in. Give the glue a few minutes to dry.

Workbench_Salezze_6

Then, arrange your Nunn Design brass adornments and other objects on top of your bead with the transfer sheet. When you are happy with the placement, glue them down with E6000. I found tiny three dimensional acrylic flowers to compliment the pattern on the transfer sheets.

Workbench_Salezze_7

Mix the Nunn Design resin according to the manufacturer’s instructions. Pour the resin over the transfer sheet and adornments to create a glossy effect. You could even pour a second layer of resin after the first layer of resin has dried to create a doming effect on the cabochon.

Workbench_Salezze_10

When the resin has dried, you now have a beautiful handmade cabochon that can be bead embroidered with seed beads, pearls and crystals and added to a beaded or fiber and metal neckstrap.

Workbench_Salezze_8

Workbench_Salezze_9

Let it bead!


Thanks for sharing, Marla!

Products Used:
Brass Stamping Metal Embellishments
Transfer Sheets
Resin Kit


Shop Nunn Design Wholesale

Nunn Design has been supplying jewelry artists with findings for over 20 years. Shop wholesale jewelry findings for creative jewelry makers.

Shop Nunn Design!

How to Purchase Wholesale?

If you are interested in becoming one of the many designers who trust their jewelry to Nunn Design Findings, please join us by registering to become one of our wholesale customers!

Please visit our Where to Buy Page for a listing of online stores that sell Nunn Design Findings retail.


If you enjoyed reading this post, please subscribe to our blog. Here are 10 Reasons Why to Subscribe and a place to do so!

1 thoughts on “Marla’s Table – Bead Embroidering Around Cabochons

Leave a Reply

Your email address will not be published. Required fields are marked *

Previous Next
Close
Test Caption
Test Description goes like this